Concordia University: federal grants and contributions: 128 agreements; $45.6M value; 17 departments; 33 programs.
Assay record ASY-CA-1II6UWO12A · Cite as: Assay Systems, “Concordia University: federal grants and contributions”, https://assay-systems.com/register/ca/grants/r/concordia-university/
The Research Support Fund (RSF) helps universities, colleges and their affiliated research hospitals and institutes sustain and maintain a research environment which will enable them to make optimal use of the federal investment in academic research provided through the three federal granting agencies.
The Research Support Fund (RSF) helps universities, colleges and their affiliated research hospitals and institutes sustain and maintain a research environment which will enable them to make optimal use of the federal investment in academic research provided through the three federal granting agencies.
To encourage scientific research and related scientific activities (e.g., data collection, integration, monitoring, and communication, including communication via conferences and symposia) and dissemination of scientific knowledge in the areas of:(a) Fisheries
Contribution to encourage scientific research and related scientific activities (e.g., data collection, integration, monitoring, and communication, including communication via conferences and symposia) and dissemination of scientific knowledge in the are
Procurement, installation, commissioning and protocol development for equipment to form an automated mammalian cell line genomics platform at Concordia University's Genome Foundry enabling high throughput cell growth, transfection and selection, automation build out and enhanced sequencing capacity.
The project aims to develop new scientific foundations to overcome technological and human-machine interaction barriers for secure, trustworthy, reliable and assured Cooperative Autonomous Networked Unmanned Vehicle (CANUMV) assets. This Project will identify critical elements for establishing trust, airworthiness, confidence, and cyber-security assurance between CANUMV assets and humans.
The purpose is to continue to advance oil spill research in Canada to enhance Canada's level of preparedness and response by leveraging new collaborative research with some of the world's best researchers, both domestically and internationally.
Thermal barrier coatings (TBCs) provide critical thermal protection to the superalloy metallic parts located in the hot sections of gas turbine engines permitting them to operate at higher temperatures. The power of a turbine is nearly directly proportional to its combustion temperature and advanced turbines are pushing the limits of operational temperature. The main objective of this partnership is to conceive, engineer and optimize the next generation of TBCs using thermal spray processes. The potential outcomes of this research project include new generation of thermally sprayed bond coats
To encourage scientific research and related scientific activities (e.g. data collection, integration, monitoring, and communication, including communication via conferences and symposia) and dissemination of scientific knowledge in the areas of: (a) Fisheries and Aquaculture Science; (b) Ecosystem Science; (c) Oceanography and Modelling; and (d) Freshwater Science.
The genome foundry is a technology platform that provides an integrated infrastructure enabling the rapid design, construction, and testing of genetically engineered cells or organisms for bio-technology applications and research. The foundry is composed of a computational biology pipeline that integrates this workflow coupled to an integrated suite of robotic equipment specifically configured to automate standard molecular biology procedures required for cellular engineering in an automated and high-throughput (HTP) fashion. The overarching goal is to establish biodesign rules and methods tha
The objective of the SDG Funding Program is to support sustainable development projects that: • Support the development and utilization of effective approaches to address sustainable development and the social, economic and environmental issues and challenges; • Develop, exchange and apply knowledge, tools and resources that address sustainable development needs of individuals, families and communities; • Foster partnerships and networks to address sustainable development and the existing and emerging social, economic and environmental issues; • Recognize and support the ability of organizatio
The purpose of this program is to increase Canadians' access to flood hazard information and maps in order to make informed decision-making related to flood mitigation, land use planning and prevent costly impacts of flood.
The purpose is to continue to advance oil spill research in Canada to enhance Canada's level of preparedness and response by leveraging new collaborative research with some of the world's best researchers, both domestically and internationally.
The Project focuses on strengthening cybersecurity in the construction sector by addressing the risks and vulnerabilities specific to this sector. It will begin with an analysis of the current cyberthreat landscape, followed by the development of a tailored cybersecurity framework designed for small and medium-sized enterprises (SMEs). This framework will include best practices, guidelines and advanced technologies, including advanced machine learning techniques for anomaly detection and secure data sharing. As part of the Project, a cloud-based knowledge exchange platform will be developed to
Multiculturalism Program
To use biochar derived from the co-pyrolysis of forest residues and municipal sludge, two wastes which most of the time find their way to landfills, to design a biochar biofiltration system for further treating wastewater effluent
The primary goal of the CubeSats Initiative in Canada for STEM (CUBICS) project will be to develop high-level skills in aspiring professionals in the space sector. It will concentrate on improving their individual competence as well as their ability to collaborate effectively in multidisciplinary projects. Concurrently, the project will have objectives in science and technology, collaborative work and STEM promotion, such as: •Continue to provide space oriented high-level skills trainings and form future space industry professionals •Continue to contribute to space-related sciences and technol
The purpose is to continue to advance oil spill research in Canada to enhance Canada's level of preparedness and response by leveraging new collaborative research with some of the world's best researchers, both domestically and internationally.
Compared with conventional construction, industrialized/off-site construction reduces material waste, cuts delivery times and improves quality and productivity. However, despite its contribution to decarbonization, several challenges have hindered its growth in the market. A 2017 study examined 5 key issues: negative stigma, lack of large-scale cases, regulatory barriers and competitive disadvantages related to financing and supply. To meet national commitments to reduce emissions, an in-depth study of industrialized/off-site construction and its stakeholders is proposed to re-examine the barr
Climate change and the increasing frequency of extreme heat events are placing unprecedented stress on large-scale infrastructure and commercial buildings. Rising electricity demand during peak periods threatens the reliability of essential services and constrains the transition toward electrified heating systems and vehicle fleets. At the same time, expanding grid capacity is limited by resource constraints. This research addresses these challenges by reducing operational energy use and mitigating peak demand through the integration of alternative energy sources. The project pursues four key
Concordia University and the NRC will explore quantum dot multi-wavelength lasers for millimeter wave generation and transmission. This research will involve the: (1) design, fabrication and investigation of one-sided PN junction photomixers (broadband and high-power), which was proposed by Concordia with simpler structure and better performance when compared to a uni-carrier traveling photomixer; (2) design, fabrication and investigation of integrated photomixer antenna’s including a single integrated photomixer and antenna and 8 integrated photomixer and antenna arrays; (3) investigation of
The scientific research objective of this project is the study and the prediction of Lunar rover mobility, which occurs on mildly cohesive granular materials in reduced gravity, through Discrete Element Method (DEM) modeling of spherical and non-spherical particles from first principles. The research objectives of this project are to a) develop a set of granular materials, from spherical glass beads and paired beads, that exhibit Lunar-relevant cohesion properties, b) characterize the effect of Lunar-g on wheel-soil interactions with these sphere-based granular materials, and model these effec
In quantum mechanical momentum theory, Clebsch-Gordan (CG) transforms coefficients can measure the degree of momentum entanglement in molecules. The complexity of the degree of entanglement generated by molecular orbital interaction needs to be elucidated in order to develop efficient quantum algorithms based on quantum mechanics, particularly under Coulomb and external fields. The potential of solid harmonic Gaussian orbitals (SHGOs), which are eigenfunctions of the angular momentum operator, has been largely underestimated for this purpose. Using SHGOs, Concordia University (CU) aims to deve
To encourage scientific research and related scientific activities and dissemination of scientific knowledge in the areas of: fisheries and aquaculture science; ecosystem science; oceanography and modelling; hydrographic science; and freshwater science.
Concordia's CHIRad-Sat will test an imaging instrument to collect data on dust measurements and will study the effect of climate change in the Kluane Lake region. The CubeSat will also evaluate the viability of a new electronic component that shows better resistance to the harsh conditions of space and that could improve the cost-effectiveness and performance of future CubeSat computers. CHIRad-Sat will be developed in collaboration with the Institut Polytechnique de Grenoble (France), the University of Montreal and Let's Talk Science. Industrial participation such as Quebec-based MDA, MPB Co
To encourage scientific research and related scientific activities (e.g. data collection, integration, monitoring, and communication, including communication via conferences and symposia) and dissemination of scientific knowledge in the areas of: (a) Fisheries and Aquaculture Science; (b) Ecosystem Science; (c) Oceanography and Modelling; and (d) Freshwater Science.
Electronic circuits specially adapted to the control of “intelligent” multi-terabit optical transceivers will be developed for intra-satellite switching systems for the deployment of future space satellite networks in low earth orbit (LEO). The expected deployment of several thousand LEO satellites for large-scale global space connectivity by OneWeb, SpaceX and others requires reliable and incredibly fast connections within the satellite itself. These types of satellites are actually huge data routers—similar to those in terrestrial networks—needed to switch several terabits/s of data over f
The main objective of this research is to support decarbonisation of the construction industry by mainly moving the industry toward modular and offsite construction (MOC), carbon-less materials and implementation of circular economy to significantly reduce carbon emissions, electricity consumptions, material waste, and improve safety and productivity in MOC supply chain network. This will involve: (1) developing smart and green MOC supply chain scheduling and planning system; (2) evaluating precast concrete mixtures used in MOC to identify opportunities to reduce the embodied carbon from the m
SBIP - QC - 2012-2013
SBIP - QC - 2011-12
Decarbonizing the built environment through extensive green renovation requires a carbon footprint of deconstruction/renovation activities, which includes the carbon footprint of materials and components and a holistic approach. High-precision live digital twin models (DTMs) could integrate data repositories and provide a platform for scenario analysis, but standards and maturity are lacking. This project defines a model-building and application strategy, analyzes the requirements for standardizing renovation DTs by creating a digital building product passport and urban-scale DTs through open
All grants from Social Sciences and Humanities Research Council of Canada
All grants from Innovation, Science and Economic Development Canada
All grants from Office of the Privacy Commissioner of Canada
Contains information licensed under the Open Government Licence – Canada. Source: Government of Canada proactive disclosure of grants and contributions (open.canada.ca, dataset 432527ab-7aac-45b5-81d6-7597107a7013), 1,327,352 rows as published, collapsed to one agreement per agreement number (per reference number where none is given) at its latest amendment, which carries the full agreement value. Years are the agreement start year. Agreements with individuals are counted but not named.